Contents
Index
Report On All Lines
This report is output as a "comma separated file" so that it can be used as source data for other reports.
The following will be written for each line in the job:
Lot The Lot number for the lot containing this line this line
Plan The Plan Name for the parcel containing this line
Acc A Number (between 1 and 7) which is the accuracy category for the line.
Misc Brg The bearing of the misclose vector for the lot containing this line
Misc Dist The distance of the misclose vector for the lot containing this line
Lot Type The lot Type (may be blank or a number between 1 and 899 inclusive)
Plan Date The dat of the plan containing this line
Area The stated area of the lot containing this line
Line Type The line type (may be blank or a number between 1 and 999 inclusive)
From The point number at the start of the line
To The point number at the end of the line
Meas Dist The stated distance for the line
Calc Dist The "ground Distance" calculated from the job coordinates.
Diff The difference between calculated and measured distance for the line
Ratio the ratio of Diff divided by the line length
Meas Bear The stated Bearing for the line
Calc Bear The calculated bearing for the line
Bear Diff The difference between stated and calculated bearing
Bear Err The difference between the stated bearing and calculated bearing after allowing for parcel orientation.
Effect The Bearing error multiplied by the line length